Miter Joint

miter jointback to other joints

A Miter Joint is the intersection of the ends of two pipes of the same size.

A single template is generated that can be used to cut both pipes.

Parameter Constraints:

Joint Name:  name of this joint which is unique to this project or currently opened joints

Pipe OD: (Outside Diameter) must be a positive number

Pipe Wall: (Wall Thickness) must be a positive number, less than half Pipe OD

 

Joint Angle: more than 0 deg. and no more than 180 deg.

180 deg. is straight cut or butt joint
0 deg. is not allowed since the pipe would be folded back on itself in this case.

Creative Uses:

Use this joint with a Joint Angle of 180 degrees to create a straight cut pipe end to be used as one end of a Union Joint where a specific length of pipe is needed.